Get rid of Lego blocks, rubber bands, large cereal pieces, and anything else that could cause an issue for your vac..
Never clean a vacuum’s filter when the vacuum is switched on or plugged in.You also shouldn’t use the vacuum with the filter removed, as this allows dust, pet dander, and other particles to clog the motor and escape into the air.. We always recommend washing filters outdoors if possible.
Any loose dirt or other particles on the filter will escape into the air when it’s removed..Step 2: Locate and Remove the Shark Vacuum’s Filters.have a pre-motor filter and a post-motor filter.
The pre-motor filter is typically a combination of foam and felt, while the post-motor is either a foam or.Shark vacuums vary in design, so you should consult the user manual to find out where the removable filters are located.
Keep in mind that not all filters are washable, so check which ones are safe to clean.. As an example, the Shark NV702UK series has three washable filters: a foam filter, felt filter, and a post motor filter..
The foam and felt pre-motor filters can be removed after taking out the dust canister..Hard floor modes typically switch off the brush bar and adjust the floorhead height, which increases performance and reduces the risk of damage..
You can sweep if you prefer, but vacuuming does a more thorough job of picking up fine dust..Step 2: Choose a Cleaning Solution.
There are many potential cleaning solutions for vinyl flooring.For regular cleaning, it’s best to just use warm water (not hot) as this is the gentlest option.. For deep cleans, make a DIY cleaning solution of warm water and a couple of drops of washing-up liquid.
(Editor: Simple Organizers)